Comtech EF Data SNM-1002 - Manual (Page 82)

SNM-1002 LinkSync
 Modem
Revision 2
Operation MN/SNM1002.OM
3–42
TX data phase relationship. Use this option to select NORMAL or INVERT for the TX
data relationship to the selected TX clock.
Upon entry, press [
↑] or [↓] to make the selection. Press [ENTER] to execute the change.
3.4.5.3.9 INTERFACE:RX DATA PHASE
RX DATA PHASE
NORMAL
RX data phase relationship. Use this option to select NORMAL or INVERT for the RX
data relationship to the selected RX clock.
Upon entry, press [
↑] or [↓] to make the selection. Press [ENTER] to execute the change.
3.4.5.3.10 INTERFACE:CTS DELAY
CTS DELAY
X SECONDS
Sets the delay in seconds (0 to 60) for the Clear To Send (CTS) signal.
Default: 0 Seconds.