Comtech EF Data SNM-1002 - Manual (Page 86)

SNM-1002 LinkSync
 Modem
Revision 2
Operation MN/SNM1002.OM
3–46
3.4.5.4.9 SYSTEM:SELF TEST
SELF TEST
AUTO
Select OFF, AUTO, or RUN. After completion of the test, SELF TEST (“PASSED” or
“FAILED”) is displayed.
• OFF bypasses built-in self test
• AUTO initiates built-in self test when turning on modem
• RUN initializes self test
3.4.5.4.10 SYSTEM:DISPLAY CONTRAST
DISPLAY CONTRAST
LEVEL: 64
Sets the contrast setting of the Front Panel menu.
Press [ENTER] to begin. Press [
↑] or [↓] to increment or decrement the number at the
flashing cursor, from 0 to 100. Press [ENTER] to execute the change.
3.4.5.4.11 SYSTEM:M&C FIRMWARE
M&C FIRWARE
FW/NNNNNN-DDR
Displays the M&C module firmware version. The display includes the month, day, and
year.
3.4.5.4.12 SYSTEM:BOOT FIRMWARE
BOOT FIRWARE
FW/NNNNNN-DDR
Displays the boot module firmware version. The display includes the month, day, and year
3.4.5.4.13 SYSTEM:FPGA FIRMWARE