Comtech EF Data SNM-1002 - Manual (Page 51)

SNM-1002 LinkSync
 Modem
Revision 2
Operation MN/SNM1002.OM
3–11
3.4.1.2 CONFIGURATION:DEMODULATOR
CONFIGURATION
DEMODULATOR
3.4.1.2.1 DEMODULATOR:CODE RATE/TYPE
RX-X QPSK 1/2
19.200 kbps
Receive code rate/type as follows:
RX-A QPSK 1/2 19.200 kbps
RX-B QPSK 1/2 19.200 kbps
RX-C QPSK 1/2 19.200 kbps
RX-D QPSK 1/2 19.200 kbps
RX-V QPSK 1/2 19.200 kbps
Upon entry, the current transmitter rate is displayed. Press [
↑ ] or [↓ ] change the
assigned filter. Press <ENTER> to execute the change.
3.4.1.2.2 DEMODULATOR:RX-IF FREQUENCY
RX-IF FREQUENCY
70.000000 MHZ
Displays the demodulator receive frequency, between 50 and 180 MHz, in 1 Hz steps.
Upon entry, the current RF-IF frequency is displayed. Press [
↑ ] or [↓ ] change the
assigned filter. Press <ENTER> to execute the change.