Comtech EF Data XPA-200 - Manual (Page 47)

XPA200-7984-I-OPT1, X-Band SSPA System Operation
XPA200-7984-I-OPT1, Rev.2 3-11
3.3.2.2 Entry Mode
Mode: The entry mode is Local or Remote. The default
is Local.
3.3.2.3 Fault Recovery: Fault Recovery is Manual or Auto. The
default is Auto.
3.3.3 Monitor Status Menu
Monitors and displays the status of:
! All SSPA power supplies.
! SSPA internal temperature.
! RF output power level.
! RF FET currents (Q1 through Q19).
3.3.4 Current Faults Menu
Displays the status of the current fault conditions. The
LCD display will indicate "FT" when a fault condition exists.
The display will indicate "OK" when a fault has not occurred.
3.3.4.1 Power Faults
Displays the DC voltage power supply faults. The DC
voltages displayed are:
! +12 VDC.
! -12 VDC.
! VCC.
! -5 VDC.
! +28 VDC
! +10 VDC, PS1 and PS2