Error processing – Comtech EF Data XPA-200 User Manual

Page 69

Advertising

XPA200-7984-I-OPT1, X-Band SSPA

Remote Control

XPA200-7984-I-OPT1, Rev.2

5-17

5.8.4 Stored Alarm

The 100 alarms are date/time stamped and stored in memory as

they occur. The alarm entry is also updated with its date/time

of clearance. The entry remains in memory until it is removed by

command.

5.8.4.1 Total Stored Alarms

This command retrieves the total number of stored alarms and

the time and date of the most recent alarm.

Retrieve Total Alarms:

<DEV/TSA_'cr'

Confirmation:

>DEV/TSA_TOTAL:nnn'cr'

LAST:hh:mm:ss mm/dd/yy'cr''lf']

5.8.4.2 Clear All Stored Alarms

Clear Alarms:

<DEV/CAA_YES'cr'

Confirmation:

>DEV/CAA_CLEARED'cr''lf']

5.8.4.3 List All Alarms

List All Alarms: <DEV/LAA_'cr'

Confirmation:

>DEV/LAA_'cr'

xxx yyyyyyyyyyy hh:mm:ss mm/dd/yy'cr'

xxx yyyyyyyyyyy hh:mm:ss mm/dd/yy'cr''lf']

Where:

xxx = stored fault number

yyyyyyyyyyy = fault description

hh:mm:ss = fault time

mm/dd/yy = fault date

5.9 ERROR PROCESSING

5.9.1 General Errors

The following Error Responses may be generated by any

command instead of a confirmation:

Advertising