Comtech EF Data XPA-200 - Manual (Page 48)

XPA200-7984-I-OPT1, X-Band SSPA System Operation
XPA200-7984-I-OPT1, Rev.2 3-12
3.3.4.2 SSPA Over Temperature Fault
Displays a SSPA temperature fault condition.
3.3.4.3 Fan Faults
Displays status of both FAN #1 and FAN #2.
3.3.5 Stored Faults Menu
The SSPA displays a total of one hundred (100) faults which
a date and time stamped and stored in memory as they occur. The
stored faults remain in memory until a clear command is entered.
3.3.5.1 Total Stored Faults
Displayed the total number of faults stored. The most
recent fault stored is displayed on the LCD display.
3.3.5.2 Clear All Stored Faults
Input command to clear all faults. The command is
"YES" or “NO” which is displayed on the LCD display.
3.3.5.3 Display Stored Fault
The local operator can sequence through the stored
faults starting with the most recent fault. The Fault
number, time, description and date is displayed on the
LCD display.