Comtech EF Data XPA-200 - Manual (Page 64)

XPA200-7984-I-OPT1, X-Band SSPA Remote Control Remote Control
XPA200-7984-I-OPT1, Rev.2 5-12
Set Fault Recovery: <DEV/AFR_xxx'cr' xxx = ON or 0FF
Confirmation: >DEV/AFR_xxx'cr''lf']
Retrieve Status: <DEV/AFR_'cr'
Confirmation: >DEV/AFR_xxx'cr''lf']
5.8.3 Status Commands
Status commands retrieve configuration, maintenance and
alarm status in summary form.
5.8.3.1 Configuration Status
Configuration Status: <DEV/RCS_'cr'
Confirmation: >DEV/RCS_'cr'
ATT_yy.yy'cr' Attenuator
AMP_nnn’cr’ Amplifier - ON/OFF
TX_nnn'cr' Transmit - ON/OFF
ONL_nnn'cr' Online - ON/OFF
AFR_nnn'cr' Auto Flt Recovery-ON/OFF
5.8.3.2 Maintenance Status
Maintenance Status: <DEV/RMS_'cr'
Confirmation: >DEV/RMS_'cr'
V+28_xx.x'cr' +28 VDC Supply
V+12_xx.x'cr' +12 VDC Supply
V-12_xx.x'cr' -12 VDC Supply
V +5_x.x'cr' +5 VDC Supply
V -5_x.x'cr' -5 VDC Supply
V+10_1_xx.x'cr' 10 VDC Supply #1
V+10_2_xx.x'cr' 10 VDC Supply #2
TEMP_xx'cr' Temperature
FPWR_xx.x'cr’ RF Forward Power (dBm)
RPWR_xx.x'cr''lf'] RF Reflected Power (dBm)