DFI CA331-NR - Manual (Page 11)

1
11
Introduction
IDE
Rear Panel I/O
Ports
I/O Connectors
BIOS
Energy Efficient
Design
Damage Free
Intelligence
Temperature
Humidity
PCB
• ITE IT8213F PCI Express to PATA host controller
• Supports Native Mode operation
• Supports PIO Modes 0, 1, 2, 3, 4
• Supports Multiword DMA Modes 0, 1, 2
• Supports Ultra DMA 33/66/100/133
• Supports ATA/ATAPI command
• Mini-DIN-6 PS/2 mouse port and PS/2 keyboard port
• 2 DB-9 serial ports
• 1 DB-15 VGA port
• 1 DVI-I port (DVI-D signal only)
• 4 USB 2.0/1.1 ports
• 2 RJ45 LAN ports (CA331-NR); 1 LAN port (CA331-P)
• Mic-in, line-in and line out jacks
• 4 connectors for 8 additional external USB 2.0/1.1 ports
• 2 connectors for 2 external serial ports
• 1 LCD brightness control connector
• 1 LVDS LCD panel connector
• 1 Digital I/O connector
• 1 LCD/inverter power connector
• 1 front audio connector for line-out and mic-in jacks
• 1 CD-in internal audio connector
• 1 S/PDIF connector
• 4 Serial ATA connectors
• 1 34-pin FDD connector
• 1 40-pin IDE connector
• 1 25-pin parallel connector
• 1 front panel connector
• 1 24-pin ATX power connector
• 2 fan connectors
• AMI BIOS
• SPI flash memory: 32Mbit (CA331-NR); 16Mbit (CA331-P)
• Supports ACPI specification and OS Directed Power Management
• Supports ACPI STR (Suspend to RAM) function
• Wake-On-Events include:
- Wake-On-PS/2 KB/Mouse and Wake-On-USB KB/Mouse
- Wake-On-LAN and Wake-On-Ring
- RTC timer to power-on the system
• System power management supported
• CPU stopped clock control
• Microsoft
® /Intel ® APM 1.2 compliant
• Soft Power supported - ACPI v2.0 specification
• AC power failure recovery
• Monitors CPU/System temperature and overheat alarm
• Monitors Vcore/12V/1.5V/1.05V/5V/5VSB voltages and failure alarm
• Monitors CPU/Chassis fan speed and failure alarm
• Read back capability that displays temperature, voltage and
fan speed
• Watchdog timer function
• 0
o C to 60 o C
• 10% to 90%
• 6-layers, microATX form factor
• 24.4cm (9.6”) x 24.4cm (9.6”)