Hardware installation, Sata (serial ata) connectors – DFI CA331-NR User Manual
Page 47
Advertising
47
2
Hardware Installation
The Serial ATA connectors are used to connect Serial ATA devices. Connect one
end of the Serial ATA cable to a SATA connector and the other end to your Serial
ATA device.
BIOS Setting
Configure the Serial ATA drives in the Advanced menu of the BIOS. Refer to
chapter 3 for more information.
SATA (Serial ATA) Connectors
SATA 0
SATA 3
SATA 1
SATA 2
7
1
RXN
GND
TXP TXN
GND
RXP
GND
Advertising
This manual is related to the following products: