DFI CA331-NR - Manual (Page 89)

89
3
BIOS Setup
South Bridge Configuration
Disabled
2 USB Ports
4 USB Ports
6 USB Ports
8 USB Ports
10 USB Ports
12 USB Ports
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
South Bridge Chipset Configuration
USB Functions [12 USB Ports]
USB 2.0 Controller [Enabled]
GbE Controller [Enabled]
GbE LAN Boot [Disabled]
GbE Wake Up From S5 [Disabled]
PCIE Ports Configuration
PCIE Port 0 [Auto]
PCIE Port 1 [Auto]
PCI Express Realtek LAN [Auto]
Chipset
Options
USB Functions
Selects the number of USB ports you want enabled.
USB 2.0 Controller
Enables or disables the Enhanced Host Controller Interface (USB 2.0) .
GbE Controller
Enables or disables the Gigabit LAN controller.
GbE LAN Boot
Enable this field if you want to use the boot ROM (instead of a disk drive) to
boot-up the system and access the local area network directly. If you want to
change the boot ROM’s settings, type the <Shift> and <F10> keys simultaneous-
ly when prompted during boot-up. Take note: you will be able to access the boot
ROM’s program (by typing <Shift> + <F10>) only when this field is enabled.
GbE Wake Up From S5
When enabled, it allows the system to wake up from S5 via the network LAN.