DFI CA331-NR User Manual
Page 37
Advertising
![background image](/files/781289/content/doc037.png)
37
2
Hardware Installation
DVI-I Port
DVI-I
The DVI-I port is used to connect an LCD monitor. This port supports DVI-D sig-
nal only.
Connect the display device’s cable connector to the DVI-I port. After you plug the
cable connector into the port, gently tighten the cable screws to hold the connec-
tor in place.
BIOS Setting
Configure the display device in the Chipset menu of the BIOS. Refer to chapter 3
for more information.
Advertising
This manual is related to the following products: