DFI CA331-NR - Manual (Page 21)

21
2
Hardware Installation
CPU
Overview
The system board is equipped with a surface mount mPGA478 CPU socket.
Note:
The system board used in the following illustrations may not resemble
the actual one. These illustrations are for reference only.
Installing the CPU
1. Make sure the PC and all other peripheral devices connected to it has been
powered down.
2. Disconnect all power cords and cables.
3. Locate the mPGA478 sock-
et on the system board.
4. Use a screwdriver to turn
the screw to its unlock po-
sition.
Lock Unlock