DFI EL330-DR User Manual
Page 31
Advertising
31
2
Hardware Installation
Parallel
Parallel Port
The parallel port is used for interfacing your PC to a parallel printer.
It supports SPP, ECP and EPP.
BIOS Setting
Configure the parallel port in the Integrated Peripherals submenu
(“Super IO Device” section) of the BIOS. Refer to chapter 3 for
more information.
Setting
SPP
(Standard Parallel Port)
ECP
(Extended Capabilities Port)
EPP
(Enhanced Parallel Port)
Function
Allows normal speed operation but
in one direction only.
Allows parallel port to operate in
bidirectional mode and at a speed
faster than the SPP’s data transfer
rate.
Allows bidirectional parallel port op-
eration at maximum speed.
1
W
Advertising