DFI EL330-DR - Manual (Page 8)

1
8
Introduction
Processor
Chipset
System Memory
Expansion Slots
Graphics
Audio
LAN
Serial ATA
IDE
Chapter 1 - Introduction
Specifications
• LGA 775 socket for:
- Intel ® Core TM 2 Quad / Intel ® Core TM 2 Duo
- Intel ® Wolfdale 45nm processors
• Supports Intel Enhanced Memory 64 Technology (EMT64T)
• Supports Enhanced Intel SpeedStep Technology (EIST)
• 1333/1066/800MHz FSB
• Intel ® chipset
- Intel ® Q45 Express chipset
- Intel ® ICH10DO I/O Controller Hub
• Four 240-pin DDR3 DIMM sockets
• Supports DDR3 800/1066MHz
• Suppor ts maximum memor y bandwidth of 17GB/s in dual-
channel mode when using DDR3 1066MHz
• Supports dual channel (128-bit wide) memory interface
• Supports up to 8GB system memory
• Supports unbuffered x8 and x16 DIMMs
• 1 PCI Express x16 slot (PCIE 2.0)
• 1 PCI Express x4 slot (PCIEX4 1.1)
• 2 PCI slots (PCI 2.3)
• Intel GMA 4500
- Suppor ts 3D, 2D and video capabilities, DX10 and OpenGL
2.1
• Realtek ALC262 2-channel High Definition Audio
• Two 24-bit stereo DACs and three 20-bit stereo ADCs
• S/PDIF input/output interface
• Two Realtek RTL8111C PCI Express Gigabit controllers
• Supports 10Mbps, 100Mbps and 1Gbps data transmission
• IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) compliant
• Four Serial ATA por ts, compliant with SATA 1.0a
specification
• Data transfer rate up to 3Gb/s (SATA 2.0)
• Supports RAID 0, 1, 0+1 and 5
• Supports up to two IDE devices
• Supports Ultra ATA 133/100/66/33