DFI EL330-DR - Manual (Page 62)

62
3
BIOS Setup
CPU Feature
This field is used to configure the CPU that is installed on the sys-
tem board. Move the cursor to this field then press <Enter>.
The settings on the screen are for reference only. Your version may not be
identical to this one.
Phoenix - AwardBIOS CMOS Setup Utility
CPU Feature
Item Help
Menu Level XX
↑↓ : Move PU/PD/+/-: Change Priority F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
PPM Mode
Limit CPUID MaxVal
CPU C State Capability
Execute Disable Bit
Virtualization Technology
Core Multi-Processing Native Mode
Disabled
Disabled
Enabled
Disabled
Enabled
PPM Mode
The options are Native Mode and SMM mode.
Limit CPUID MaxVal
The CPUID instruction of some newer CPUs will return a value
greater than 3. The default is Disabled because this problem does
not exist in the Windows series operating systems. If you are using
an operating system other than Windows, this problem may occur. To
avoid this problem, enable this field to limit the return value to 3 or
lesser than 3.
CPU C State Capability
This field allows you to select the lowest C state.
Execute Disable Bit
When this field is set to Disabled, it will force the XD feature flag to
always return to 0.