DFI EL330-DR - Manual (Page 69)

69
3
BIOS Setup
PEG/OnChip VGA Control
This field is used to select the graphics controller that will serve as
the primary boot device. The options are Auto, Onchip VGA and
PEG Port.
On-Chip Frame Buffer Size
This field is used to select the onboard VGA’s frame buffer size that
is shared from the system memory.
Total GFX Memory
For Windows XP operating system, the maximum value is based on
the system memory size.
512MB for 1GB DRAM
768MB for 1.5GB to 2GB DRAM
1GB for above 2GB DRAM
The options are 128MB, 256MB and MAX.
PAVP Mode
The options are Disabled, Lite and Paranoid.