Digi-Star Diet Manager Set-up & User Guide - Manual (Page 13)

Diet Manager
D3651US-D 9
The feeding order determines how the order of the corrals is displayed on the EZ3500.
When the feeding order has been set, click on Save Feeding Order. A temporary change can be made by
changing the order and not clicking on Save Feeding Order. This sends the corrals in the order specified,
but does not save the new order.
Send Loads to the DataKey
™
When you are satisfied with the feeding order, click on Send All to send all the feeding data to the
DataKey
™ or send selected by clicking on the pen you want to send and then click on Send Selected.
You may also send Recipes only if you are loading from a stationary load box and unloading into a delivery
box. Then click on Send All.
As the data is sent to the DataKey ™ , a green progress bar will track the percent complete.
When all the data has been sent to the DataKey ™ , a
message box will appear showing the status of the data sent
and the right-hand window will be blank.
Datakey Docking Station Activity Light Formats
This shows how the activity light
would behave: (Green) On, (Blank)
Off
RF Datalink
When using RF Datalink with Diet
Manager.
Select the feeding number and set the
feeding order.
Set the correct file path for RF Datalink
to recive the file. Normaly set to C:\