Digital Audio Labs PowerShape 2.1 - Manual (Page 15)

SOFTWARE CONFIGURATION
The PowerShape 2.1 configuration software provides real time control of all audio and control parameters. Most
editable parameters are presented on a single screen for quick, intuitive access. The application can be run in
standalone mode without a PS-2.1, or it can control a PS-2.1 via USB, Serial (RS-232) or Network (Ethernet).
The latest version of this software is available at
www.digitalaudio.com/powershape .
AUDIO PROCESSING
See the Block Diagram, Input Configuration and Output Configuration sections of the manual for operational
information related to the audio processing.
COMMUNICATION STATUS
When the configuration software is connected to a PS-2.1 via USB, Serial or Network the corresponding green
indicator will illuminate. If using the serial connection, configure the port and select the connect button. If using the
network connection, configure the IP address and select the connect button.
15