Digital Audio Labs PowerShape 2.1 - Manual (Page 16)

SERIAL (RS-232) CONFIGURATION
Additional serial port configuration settings are located within the Communication section of the menu bar. Serial
settings can be configured in this box.
NETWORK (ETHERNET) CONFIGURATION
Additional network port configuration settings are located within the Communication section of the menu bar.
Network settings can be configured in this box.
SAVE, LOAD AND PRESETS
The Presets section of the menu bar provides options to open and save configuration files and load and save
presets.
NEW, OPEN AND SAVE
New: Performs a full reset of the settings in the application.
Open: Load an existing .xml configuration file. Perfect for installs that require multiple PS-2.1’s with the same
settings.
Save/Save As: Save the currently selected configuration settings to a file on your computer. Perfect for backup or
duplicating your PS-2.1 configuration in another unit.
FACTORY PRESETS
Three factory presets can be loaded: 2.0 stereo, 3.0 monaural and 2.1 stereo with a sub. These are baseline
presets that are intended to be edited further.
USER PRESETS
Four user presets can be saved and loaded. The user presets provide easy recall to many settings at once, and
can greatly simplify programming in environments that have repeatable conditions.
FIRMWARE UPDATE
The Advanced section of the menu bar provides a firmware update option. The latest PowerShape 2.1 firmware
version is available at
www.digitalaudio.com/powershape .
HELP
The Help section of the menu bar provides the ability to see current version of the PowerShape configuration
software. This version is located in the lower left corner of the box in a X.X.X.X format. If a PowerShape 2.1 is
connected to the computer the Main CPU section will display the firmware version of the unit.
16