Digital Audio Labs PowerShape 2.1 - Manual (Page 23)

Parameter Item Names
Version and status information. All items in this section are valid only for a get command.
get boot firmware version number: verboot
The value returned is the juxtaposition of the major and minor version numbers. The lower 3 digits are the minor
version number (typically 2 digits, but expanded to 3 digits when 100 or above), and the remaining upper digits are
the major version number.
Example responses:
=sverboot:2015! version is 2.15
=sverboot:1004! version is 1.04
=sverboot:23106! version is 23.106
get main CPU firmware version number: vercpu
The value returned is in the same format as the “verboot” item, above.
get DSP1 firmware version number: verdsp1
The value returned is in the same format as the “verboot” item, above.
get DSP2 firmware version number: verdsp2
The value returned is in the same format as the “verboot” item, above.
get all configuration settings: all
This causes the amplifier to report the current values for all controls, as if a “get” command was issued for each of
them. This command can be useful to initialize an application with the current parameters being used by the
amplifier. This command does not return status information or VU settings.
! ! ! ! ! ! ! ! ! ! ! ! 23