DR Power 30 Snow Thrower - Manual (Page 13)

CALL TOLL FREE 1-800-DR-OWNER 9
CHAPTER 3
SETTING UP YOUR DR SNOW THROWER ATTACHMENT
This chapter outlines unpacking and a few simple steps you will need to follow to set up your new Snow
Thrower and attach it to your DR FIELD and BRUSH MOWER. If you have any questions at all, please feel
free to contact our Customer Service Representatives at our Toll-Free number: 1-800-DR-OWNER (376-9637).
Unpacking
NOTE: We recommend two people for the unpacking procedure, as the unit weighs 138 pounds.
Tools and Supplies Needed:
•
Knife
•
Gloves
•
Metal Shears (Side Cutters)
•
7/16" Wrench or Socket
•
Eye Protection
Parts Supplied:
•
DR SNOW THROWER ATTACHMENT
•
Rotation Handle
•
Worm Shaft
•
V-Belt
•
Parts Box containing:
- Handle Support
- Chute Assembly
- (3) Retaining Plates
- U-Bolt, 1/4" NC x 1-1/8" x 2"
-
(2) Plastic Bushings
-
(6) Hex Head Bolts, 1/4" NC x 1/2"
-
(6) Flange Nuts, 1/4" NC
- Flat Washer, Worm Shaft
- Hair Pin, 2 mm x 41 mm
- Cotter Pin, 1/8" x 1-3/4"
- Safety & Operating Instructions
- Packing List
- (3) Spare Shear-Bolt & Nut
- Washer, Chute Base