DR Power 30 Snow Thrower - Manual (Page 44)

DR ® Power Equipment, A division of Country Home Products ®
1 2 7 M E I G S R O A D , P . O . B O X 2 5 , V E R G E N N E S , V E R M O N T 0 5 4 9 1
1-800-DR-OWNER (376-9637) • www.dr-owner.com ©2007 CHP, Inc. 189891C
Daily Checklist for the DR SNOW THROWER ATTACHMENT
To help maintain your DR SNOW THROWER ATTACHMENT for optimum performance, we recommend
you follow this checklist each time you use your machine.
BEFORE PERFORMING ANY MAINTENANCE PROCEDURE OR INSPECTION WHILE THE SNOW THROWER
IS ATTACHED TO THE POWER UNIT: DISENGAGE THE DRIVE CLUTCH, STOP THE ENGINE, SET THE
PARKING BRAKE, WAIT FOR ALL MOVING PARTS TO COME TO A COMPLETE STOP AND DISCONNECT THE
SPARK PLUG WIRE(S), KEEPING IT AWAY FROM THE SPARK PLUG(S).
[ ] DISCHARGE CHUTE: Inspect the Chute for accumulated snow, ice or other debris.
[ ] ROTATION SYSTEM: Inspect the Chute Rotation System to be sure that operates freely and does
not travel beyond the safety limits. See Figure 10 on page 14.
[ ] DRIVE BELT: Check the condition of the Drive Belt for nicks and cuts. If you find the Belt worn or
damaged, replace it with a new DR Snow Thrower Belt.
[ ] SKID SHOES: Check the condition of the Skid Shoes and that they are properly adjusted for the
operating surface. See page 20 for the adjustment procedure.
[ ] GENERAL CONDITION: Check the general condition of the machine, e.g.; nuts, bolts, welds, etc.