DR Power Walk-behind 12.5 HP Tecumseh with 42 Lawn Deck User Manual
Page 33
CONTACT US AT
www.DRPower.com
or CALL TOLL FREE 1-800-DR-OWNER 29
Lubricate the Drive Chain with SAE 30 oil every 25 operating hours—more often if you operate the machine
in extremely dusty or wet conditions. Remove the Chain Cover, lubricate the Chain, and replace the Cover
(Figures 13
and
14).
NOTE:
When using the grease gun in the next steps, pump only until you feel slight resistance (1-2 pumps should
do it).
1. Grease the Fitting on each of the front Caster Wheels (Figure 15).
2. Grease the Left and Right Fitting on the Lawn Deck Frame where the Wheel Castor Spindle swivels
(Figure 16).
NOTE 1: Perform this lubrication more often in dry and dusty environments.
NOTE 2: This would also be a good time to check the air pressure in the Caster Wheel Tires (Figure 15). The
maximum Tire pressure is marked on the side of each Tire. Do not exceed the manufacturer’s
recommended maximum pressure.
Figure 14
Lubricate Chain
Figure 15
Grease Fitting
Figure 16
Grease Fitting
Lawn Deck
Frame
Wheel Caster Spindle
Chain Cover
Valve Stem
Figure 13