DR Power Tow-Behind 8.00 Premier (Pre-August 2010) User Manual

Page 24

Advertising
background image

20 DR

®

PREMIER LEAF and LAWN VACUUM

Connecting the DR LEAF and LAWN VACUUM to your Lawn Tractor

The following procedure includes the steps necessary for connecting the DR LEAF and LAWN VACUUM to
your lawn tractor.

1. Position your Lawn Tractor on level ground at a slight angle to the Two-Point Trailer Hitch on the

DR LEAF and LAWN VACUUM (Figure 13) and set the Parking Brake.

2. Lift the Trailer Hitch and position one end of the Hitch so that the Hitch Plate is in the opening of

the Trailer Hitch (Figure 13).

3. Align the closest hole in the Hitch Plate with the corresponding holes in the Trailer Hitch and insert

a Clevis Pin w/Rubber Washer and Hitch Clip (Figure 13).

4. Pivot the Trailer around so that the Trailer Hitch moves in toward the Hitch Plate; aligning the

remaining holes in the Hitch with the outermost hole on the other end of the Hitch Plate (Figure 13).

5. Insert a second Clevis Pin and Hitch Clip.



Figure 13

2nd Clevis Pin and
Hitch Clip here

Opening

1st Clevis Pin and Hitch
Clip here

Trailer
Hitch

Hitch Plate

Advertising