ESI Audioterminal 010 - Manual (Page 18)

19
1. External Connection Cable Port
This port is connecting for the exclusive external connection cable that has 1In/1Out 16 channels
MIDI Interface and SPDIF (Coaxial) connection. This cable is provided with the Audioterminal 010.
As below picture, the cable consists of total 5 connectors. In the one side, there is an 8-pin
connector to Audioterminal 010. The other side, there are two small connectors for SPDIF digital
In/Out port and large connectors for MIDI interface In/Out. These 4 cables are labeled for
distinction.
2. Optical IN-ADAT 8 channel/ SPDIF 2 channel Input
This Optical Input port is used two different ways. You can select it on the Audioterminal 010
control panel.
- You can connect from external devices supporting ADAT format (ADAT multi
channel recorder or digital mixer)’s output to this port.
- You can connect from external device supporting SPDIF format (CD, MD, DAT)’s
output to this port.
3. Optical OUT-ADAT 8 channel/SPDIF 2 channel out
This Optical Output port also supports two different formats. You can select it on the Audio
terminal 010 control panel.
- You can connect from this port to external device supporting ADAT format (ADAT
multi channel recorder or digital mixer)’s input.
- You can connect from this port to external device supporting SPDIF format (CD, MD,
DAT)’s input.