ESI Audioterminal 010 User Manual
Page 6
7
1. The Audioterminal 010 PCI card is placed into the anti-static plastic pouch as it is
packaged. Do not open the pouch before you install the card.
2. Turn off the computer power and remove the power cable from your computer power
supply.
3. Remove the computer cover. Make sure that you have an available PCI slot in your
motherboard to install the Audioterminal 010. Please refer to user’s manual of your
computer to remove the cover.
4. To avoid possible static shock to the computer parts, discharge it by touching the
computer case or grounded ports. We recommend you to use an anti static device such
as anti-static wristband.
5. When you need to hold the Audioterminal 010 PCI card, please, hold it on the guide. Do
not grab the card by the board.