ESI Audioterminal 010 - Manual (Page 23)

24
2. Input Level Fader
Input Level Fader’s functions are same as Output Level fader. See the ‘output level fader’ part for
reference.
3. Master Mixer Fader
a. MUTE – Master channel mute
Press this button to mute the sound of Mater Mixer
b. Sample Rate Display
It display selected sample rate. When you check ‘Lock’, you can set sample rate only in AT010
control panel and you cannot change sample rate in your applications. In this case, AT010 control
panel becomes the master clock provider.
c. Master Level Fader
Master Level Faders would change the level of the Master output.
d. Level Meter
The Level meter displays the signal level of whole signals.
e. Output Level Indicator
The Output Level Indicator shows the current level setting for Master output.
f. Master Mixer Mode select button
Master Mixer mode has three different modes.
-Mute – Master Mixer doesn’t work. 20 In/Out channels send signal directly without Master Mixer.
-MAIN- Send 20 channel’s signals to Multi channel 1,2. You can adjust each volume in each
channel’s fader. Multi channel 1,2 will adjusted in Master Mixer level fader.
-SPDIF – Same function as MAIN mode. Instead of Multi channel 1,2 send master output to SPDIF
Output port.