ESI Audioterminal 010 - Manual (Page 3)

4
Features
Audioterminal 010 supports ADAT format. You can use it with various digital mixer, digital
recorder and hard disk recording devices which supporting ADAT format of Alesis.
Audioterminal 010 supports TDIF, which adapts DSUB 25-pin cable of TASCAM. You can use it
with various digital mixer, digital recorder and hard disk recording devices of TASCAM.
Audioterminal 010 supports R-BUS from Roland. You can also use it with various multitrack
recorders and digital mixers of Roland.
Audioterminal 010 has SPDIF digital input and output ports in optical and coaxial connections.
You can easily switch ADAT, TDIF, R-BUS 8 channel Interface and SPDIF 2 channel Interface
and can mix down your work to 2 channel SPDIF.
Audioterminal 010 provides an on-board 2-pin port that can be used to connect directly with CD-
ROM that has digital audio output pins. Most CD-Rom drives have a 2-pin digital output port.
You can connect it with CD In port of Audioterminal 010 easily. This allows you to transfer CD
digital audio directly to your PC with ease, and you can play back your CD audio with
Audioterminal 010.
The Audioterminal 010 supports all denominations of 44.1kHz or 48kHz standards sample rates
from 32kHz to 96kHz. It supports 16~24bit also.
TDIF Digital Interface Support
SPDIF Optical, Coaxial digital Input/Output
CD-ROM Digital Input
Multiple Sample Rate / Bit support
R-BUS Digital Interface Support
ADAT 8 channel interface support