ESI Audioterminal 010 - Manual (Page 20)

21
5. Audioterminal 010 Control Panel
If you complete the Audioterminal 010 hardware installation and software setup, you need to learn more
about the Audioterminal 010 Control Panel. This control panel is where you to control your setup for the
Audioterminal 010.
The Audioterminal 010 Control Panel is built for easy to use. However, it could give a complicated look
since there are many inputs and outputs. All input and output controls are the same. So, if you learn about
one control, you can use the others easily.
After successfully installing the Audioterminal 010 hardware and software, you can see the AT010 icon in
the system tray. This is the Audioterminal 010 control panel icon and the control panel will be launched as
you click on this icon.
1. Output Level Fader / Level Meter
2. Input Level Fader / Level Meter
3. Master Mixer Fader
4. Pull Down Menu