ESI Audioterminal 010 - Manual (Page 26)

27
<SPDIF Mode>
This will set 2 channel digital output format of the Audioterminal 010.
- Consumer: (IEC 958 Type II)
- Pro: (IEC 958 type I)
<TDIF Emphasis>
When you select TDIF, you can select Emphasis function of TDIF in this menu.
<Clock Src>
Select this menu for choosing digital clock source of the Audioterminal 010.
- Internal: Selecting Internal makes the Audioterminal 010 as the master digital clock.
- TDIF : Selecting TDIF makes external TDIF device as the master digital clock.
- R-Bus: Selecting R-Bus makes external R-Bus device as the master digital clock.
- WORD [Fs]: Accept clock from external Word Clock [Fs] device via internal Word Clock of the
Audioterminal 010.
- ADAT: Selecting ADAT makes external ADAT device as the master digital clock.
- Digital (CD) In: When you accept input signal via CD_IN port of the Audioterminal 010, selecting
‘Digital In’ makes CD-Rom the master digital clock
- External In: Using when you accept digital clock of the other Audio card via EXT_IN port of the
Audioterminal 010.
- WORD [Fs256]: Using when you accept digital clock of external Word Clock device [Fs256] via
Word Clock port of the Audioterminal 010.
<TDIF Clock>
Using when you choose TDIF or set clock format of TDIF.