ESI Audioterminal 010 - Manual (Page 22)

23
d. Level Meter
The Level meter displays the signal level of the wave signal. You can see the level of each output
to compare them and adjust the level on the basis of these meters. If you wish to send out a wave
file to an external device, refer to the level meters to adjust the signal to the proper level.
e. Output Level Indicator
The Output Level Indicator shows the current level setting for each of the outputs. You can
compare the output levels based on this indicator in order to adjust the output level to a desired
level. Move the output level fader in order to set it to the proper level.
f. Channel Name display
It displays the function of each channel.
‘Out 1~8’ are output of multi channel port and ‘SPDIF’ are output of SPDIF port.
g. Group – fader group select button
You can make a group of 10 faders of the Audioterminal 010. Initial mode display ‘Group’. In this
mode, you can adjust level independently. When you press this button, it is changed from A to D.
Same groups are adjusted simultaneously.