ESI QuataFire 610 - Manual (Page 15)

ESI QuataFire 610
2. Level Faders
1. Input Monitor
Adjust input monitoring level of QuataFire 610. Set the level using the mouse, mouse
wheel, or cursor keys. The number on the bottom indicates the relative level in dB.
2. Analog Output
Adjust output level of QuataFire 610. Set the level using the mouse, mouse wheel, or cursor
keys. The number on the bottom indicates the relative level in dB.
3. Link Button
Links the L/R faders for stereo operation. Unselect the button, if you need to control the left
and right levels independantly.
4. Mute Button
Select mute button to mute each source.
5. Sample Rate and Latency
Check and change the current value of sample rate and latency.
15