ESI QuataFire 610 - Manual (Page 2)

ESI QuataFire 610
1. Introduction
Welcome!
Thank you for choosing the ESI QuataFire 610. QuataFire 610 is an ultra-compact,
professional, mobile recording interface for laptops and desktops. The high resolution 24-
bit 96/192kHz 6-in 10-out multi-channel audio interface and 32 channel MIDI interface
uses a high bandwidth IEEE1394 (FireWire) bus connection.
QuataFire 610 features low-noise microphone preamps, Neutrik combo input connectors
with phantom power and gain control and RCA line inputs providing you a professional
quality audio “front-end” for your DAW. 8 line level analog outputs allow you to connect
to a mixer, surround matrix, or directly to powered monitors. A separate headphone output
allows you to monitor your signals directly, S/PDIF digital I/O lets you record directly to
and from a CD, MiniDisc or DAT and 32 MIDI channels provide you with ample MIDI
connectivity. QuataFire 610 offers all these features in a rugged, compact package that can
travel with you anywhere.
Even if you are an experienced professional, please take some time to read through this user
manual and familiarize yourself with the QuataFire 610’s features and operation. You may
also want to refer to your audio software’s documentation to better understand how the
QuataFire 610’s features are integrated with the program. Your experience and enjoyment
of your QuataFire 610 will be greatly enhanced by a good working knowledge of your
audio software.
2