ESI QuataFire 610 - Manual (Page 16)

ESI QuataFire 610
· When you synchronize the sample rate from an external digital device connected to the S/PDIF
input, the sample rate must be in the “44.1~ 96kHz” range.
· Please do not connect any S/PDIF input cable when you are not using the digital input because
QuataFire 610 will be automatically synchronized with the external digital signal.
· When a cable is connected to the S/PDIF input, the LED blinks and turns to red while detecting
the external clock.
· After removing the cable, you must reset the sample rate.
16