6) peak indicator led, 7) hi-z, 8) midi signal leds – ESI QuataFire 610 User Manual
Page 5: 9) headphone connector and level control, Rear panel, 1) 2 midi input and 2 midi output connectors, 2) s/pdif coaxial input and output connectors, 3) analog outputs 1-8, 4) analog inputs 3/4
ESI QuataFire
610
Button selects the option for both input channels 1/2 simultaneously.
(6) Peak Indicator LED:
Lights up when some of the analog input channels 1/2/3/4 are clipping.
(7) Hi-Z:
Direct instrument input switch. When the button is pressed, you can use analog input 2 as
electric guitar or bass input. Only unbalanced TRS phone jack connection is available for
this setting.
(8) MIDI signal LEDs
(9) Headphone connector and level control:
Monitor all input sources and wave output 1/2 through the headphone output. Output level
can be adjusted with the control knob.
2. Rear Panel
(1) 2 MIDI input and 2 MIDI output connectors
(2) S/PDIF coaxial input and output connectors
(3) Analog outputs 1-8:
RCA connectors for output 1-4. 1/4" stereo jack connectors for output 5-8.
(4) Analog inputs 3/4:
RCA connectors.
5