Feelworld FW-1D/S/O - Manual (Page 13)

12
1.8．Tally use and connect
TALLY Kit
● TALLY use and connect
To use random TALLY kit connect TALLY signal line from the switching station
as shown
Connection method:
1. Active connection: GND and G with 0-5V voltage wire shorted to ground
access
When the voltage is 0.3-2.7V, green TALLY lamp lights
When the voltage is 2.8-5.5V, red TALLY lamp flashes
2. Passive connection: GND, R +, G all shorted red TALLY lamp flashes
● Please note the connection method
2. Button operation instruction
SDI
→
Digital component serial signal input selection
HDMI
→
High Definition Multimedia Digital Signal input selection
VIDEO
→
Composite video signal input selection