Feelworld FW-1D/S/O User Manual

Page 15

background image


3. Menu function introduction

In the operating status, press button“

”, then enter into OSD mode.

Press the unit button”

”or “

"to select the options which you need:

(display result)


(system setting)

(scan position adjust),

after select the button you need, press“


on the unit to confirm, if

need to exit OSD menu, repress button “


Display result setting

(this setting has 3 pages menu)

Press "

"key, pop up OSD menu as below, ”

”or “

"to select

, press "

" or "

" to confirm, press “


” to select the

adjustment, then use "

" or "

" to adjust or select the adjustment.


" to exit.

Menu page 1 picture

Contrast : To adjust the brightest and darkest ratio of the image

Brightness: To adjust the image's brightness

Saturation: To adjust the saturation

Tint: Adjustment of the NTSC signal in the composite video mode, the

other mode is invalid

Sharpness: To adjust the depth to the image

Color Temp: Use the adjustment the color temperature can be

pre-set (user, 6500K.7300K, 9300K)