Optional infrared burner operation, Side view (burner on hi light and glowing orange), Side view (with cover on) – Fire Magic 3049 Aurora Infrared Burner Kit Installation User Manual

Page 5

Advertising
background image

5

The infrared (IR) searing burner (optional) cooks with
a powerful radiant heat.

Light the infrared burner following the LIGHTING
INSTRUCTIONS in this manual or printed on the
drip tray. Follow these guidelines when operating the
Infrared burner:

DO NOT place food on the cooking grid until

the IR burner glows orange (Fig. 5-3). Drippings
are heated and evaporate instead of sticking to and
impairing burner function.

For cleaning purposes; always leave your burner

on (after cooking) for an additional 5 minutes, to
allow for a burnoff period. This is important to
keep your burner clean and operating properly.

As the burner is self cleaning (at full temperature);
avoid the use of cleaners or abrasives.

• When not in use, always cover the infrared burner

with the stainless-steel cover. This protects the
burner from drippings (from other cooking), airborne
particles, and foreign objects (Fig. 5-2).

• Do not strike or scratch the burner ceramic as it

may chip, crack, or break (Fig. 5-2).

Note: Digital thermometer does not give accurate

readings for infrared burners.

Important: When grilling with the infrared burner,

always place a cooking grid above it.
The cooking grid must be removed for
rotisserie cooking.

CAUTION: Never attempt to operate the IR burner

with the protective cover in place.

WARNING

Only handle the infrared burner cover when the
grill is cold or with a well-insulated long-handled

tool or heat resistant gloves.

Burner ceramic must be protected with cover when
burner is not in use.

Drips and particles evaporate before hitting infrared
burner when cooking at the maximum setting.

Note: Flavor grids are not to be used with infrared

burners.

O

F

F

HI

LIGHT

LO

W

Fig. 5-3

SIDE VIEW
(burner on HI LIGHT
and glowing orange)

Flash

tube

Ignitor

electrode

Fig. 5-1

Cut-out for

Flash tube

Cover

Ignitor

electrode

Flash tube

OFF

HI

LIGHT

LO

W

Fig. 5-2

Flash

tube

Cover

SIDE VIEW (with cover on)

Ignitor

electrode

Food

particles

or debris

Drippings

and other

liquids

Airborne

dust or

grease

NO foreign

objects

OPTIONAL INFRARED BURNER OPERATION

Advertising
This manual is related to the following products: