Flowserve Worthington WXB - Manual (Page 38)

WXB USER INSTRUCTIONS ENGLISH - 07/14
Page 38 of 51
M48 4084 (3012) 5899 (4351) 5990 (4418) 1724 (1272) 2178 (1606) 8530 (6292)
M64 9750 (7192) 14083 (10388) 14300 (10548) 4117 (3037) 5201 (3836) 20370 (15025)
M68 11768 (8680) 16998 (12538) 17260 (12731) 4969 (3665) 6277 (4630) 24580 (18130)
M76 25230 (18610) 8270 (6100)
Above mentioned torques are for all screwed unions, which works under dynamical load. For all other
connections you can use a corresponding smaller torque.
Anchor bolts are usually made of 4.6 material. Tightening torques indicated in above table shall not be
exceeded.