Flowserve TB-MAG INNOMAG - Manual (Page 13)

INNOMAG® TB- MAG™ ASME and ISO SEALLESS ENGLISH 26999988 06-14
Page 13 of 44
TB-MAG TM ISO-DIMENTIONAL PUMP IDENTIFICATION CODE
Wet End E1 165 1 1 1 2 0 - E N 0 Drive End
Models
(Suctio n x Discharge x No minal Impeller Diameter) Impeller Dia. (mm) Drive Torque Option
Code Drive Torque Max. Min. 0 - Standard Torque
E1 - (50 x 32 x 160mm) 0,1 102 1 - High Torque
E3 - (65 x 50 x 160mm) 0,1 102 2 - Ultra High Torque
F1 - (50 x 32 x 200mm) 0,1 140 Ultra High Torque is for "K,W" Motor Frame Only!
F4 - (65 x 40 x 200mm) 0,1 140
G2 - (100 x 65 x 200mm) 0,1 140 Motor Frame
NEMA C-Face
Impeller Diameter A - 56C (A Series Only)
† mm, (i.e. - 165, 140) B - 143/5TC
† Impeller trim for ISO models must be specified in mm. C - 182/4TC
ta D - 213/5TC
Bearing System ta E - 254/6TC (M ax. A -Series)
Bushing Shaft, Pump F - 254/6 (4 Pole)
S 1 - SiC SiC $ 284/6TSC (M ax. B -Series)
C$ 2 - SiC+DLC SiC+DLC $ G - 324/6TSC
$ H - 364/365TSC
Wear Rings/Thrust Collar System tc J - 284/6TC
Imp. Wear Ring Cont. Shell Wear Ring Case Wear RingCase Thrust Collar uc K - 324/6TC & 405TSC
S 1 - SiC SiC SiC CF-PTFE IEC B5
2 - SiC SiC CF-PTFE SiC M - 80 (A Series Only)
3 - SiC SiC SiC SiC N - 90S/L
C$ 7 - SiC SiC+DLC SiC+DLC CF-PTFE P - 100L/112M
C$ 8 - SiC SiC+DLC CF-PTFE SiC+DLC ta R - 132S/M (M ax. A -Series)
C$ 9 - SiC SiC+DLC SiC+DLC SiC+DLC $ S - 160M
$ T - 160M/L (M ax. B -Series)
Gasket (All Gaskets are 0.210" square cross section) tc U - 180M/L
S 1 - FEP/FKM (Fluorocarbon) tc V - 200L
2 - FKM (Fluorocarbon) uc W - 225S/M
3 - EPDM (Ethylene Propylene) uc Y - 250M
uc Z - 280S
Flanges (All Pumps Are ISO Dimensional, all flanges are ISO PN16 castings w ith various bolt patterns) ta-A-Series Optional High Torque Drives $
S 2 - ISO/DIN (PN16) Flanges tc-B/C-Series Optional High Torque Drives $
3 - JIS (10 kg/cm 2 ) Flanges uc- Optional Ultra High Torque Drive $$
0 - ANSI (Class 150) Flanges
Product Group
Construction E - TB-MAG TM E
Impeller Casing Casing Retaining Containment Shell Impeller F - TB-MAG TM F
Body Casting/Lining Drain Rings Lining/Composite Torque G - TB-MAG TM G
S 0 - CF-ETFE D.I./ETFE Yes CF-ETFE CF-ETFE/Aramid Standard LC $$ L - Long Coupled F/G
1 - CF-ETFE D.I./ETFE No CF-ETFE CF-ETFE/Aramid Standard SS $$$ S - Secondary Seal Unit F/G
C$ 4 - CF-ETFE D.I./ETFE Yes CF-ETFE CF-ETFE/Aramid Ultra LC-Standard Long Coupled Bearing Frame for
C$ 5 - CF-ETFE D.I./ETFE No CF-ETFE CF-ETFE/Aramid Ultra TB-MAG TM Models F1-G2, $$ Adder
S - Standard Material/Options Material Guide SS-Long Coupled Bearing Frame equipped with
C - Consult Factory for Availability CF - Carbon Fiber Patented Secondary Sealing System for
$ - Price Adder D.I. - Ductile Iron TB-MAG TM Models F1-G2, $$$ Adder
ETFE - Ethylene-tetrafluoroethylene
PTFE - Polytetrafluoroethylene
(ANSI DIMENSIONAL BEARING FRAME ONLY)
SiC - Silicon Carbide (Ceramic)
Rev. Date 4/17/2014
Not an exhaustive list. Available options subject to change without notice. Consult factory for availability and pricing.
Pump Size
169
169
165
210
210
210
3.3 Nameplate
Every TB-
MAG™ sealless pump unit has a
nameplate to provide information on your pump.
The nameplates are located on the side of each
casing. It is recommended that the purchaser
record the serial number and use it for reference
when requesting information, service, or parts from
your supplier.
Permanent records for this pump are kept by the
serial number and it, therefore, must be used with
all correspondence and spare parts orders. Tag
includes the following:

Pump Model Number: Example – A1

Pump Code: Example – A161311100-AD0

Serial Number: Example – 44000

Impeller Diameter / Max Impeller Diameter
(in. or mm.)

Duty Point (Flow/TDH)(gpm / ft. or m
3
/hr /
m)