Flowserve L120-85 Actuator - Manual (Page 2)

L120-85 Actuator
Installation and Maintenance Manual
©2005 Copyright Flowserve Corporation. All rights reserved.
Printed in the United States of America.
Disclaimer
No part of this book shall be reproduced, stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying,
recording, or otherwise without the written permission from Flowserve. While every precaution has been taken in the preparation of the
book, the publisher assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of
the information contained herein.
This document is proprietary information of Flowserve furnished for customer use ONLY. No other uses are authorized without written
permission of Flowserve.
Flowserve reserves the right to make changes, without notice, to this document and the products it describes. Flowserve shall not be liable
for technical or editorial errors or omissions made herein; nor for incidental or consequential damages resulting from the furnishing, perfor-
mance or use of this document.
This manual contains information that is correct to the best of Flowserve’s knowledge. It is intended to be a guide and should not be consid-
ered as a sole source of technical instruction, replacing good technical judgment, since all possible situations cannot be anticipated. If there
is any doubt as to exact installation, configuration, and/or use, please contact Flowserve at 1-800-225-6989.
The choice of system components is the responsibility of the buyer, and how they are used cannot be the liability of Flowserve Corporation.
However, Flowserve’s sales team and application engineers are always available to assist you in making your decision.
Belden ® is a registered trademark of Belden, a division of Cooper Industries, Inc.
Limitorque L120-85 Installation, Operation and Maintenance FCD LMENIM1202-00 – 11/05
2