Flowserve L120-85 Actuator - Manual (Page 5)

1.1 Purpose
This Installation and Maintenance Manual explains how to install and
maintain the L120-85 actuator. Information is provided for installa-
tion, disassembly, reassembly, lubrication, and parts selection.
c WARNING: Read this installation and maintenance man-
ual carefully and completely before storing, installing,
operating or troubleshooting your Flowserve Limitroque
actuator. Be aware of electrical hazards within the actua-
tor and high-pressure hazards at the attached valve or
other device when installing or performing maintenance
on your L120-85 actuator.
1.2 User Safety
Safety notices in this manual detail precautions the user must take
to reduce the risk of personal injury and damage to the equipment.
The user must read and be familiar with these instructions before
attempting installation, operation, or maintenance. Failure to observe
these precautions could result in serious bodily injury, damage to the
equipment, voiding of the warranty, or operational difficulty.
Safety notices are presented in this manual in three forms:
c WARNING: Refers to personal safety. Alerts the user to
potential danger. Failure to follow warning notices could
result in personal injury or death.
a CAUTION: Directs the user’s attention to general precautions
that, if not followed, could result in personal injury and/or
equipment damage.
NOTE: Highlights information critical to the user’s understanding of
the actuator’s installation and operation.
1
Introduction
5
Limitorque L120-85 Installation, Operation and Maintenance FCD LMENIM1202-00 – 11/05
flowserve.com