Product capabilities and features, 1 product identification – Flowserve L120-85 Actuator User Manual
Page 7
2.1 Product Identification
The actuator unit nameplate is located on the back of the unit,
opposite the limit switch compartment. The nameplate contains the
following information:
• Product name
• Point of Manufacture
• Unit Size
• Order Number
• Serial Number
• Customer Tagging
• Certification Information
The motor nameplate is located on the motor. The nameplate con-
tains the following information:
• ID Number
• Run Torque
• RPM
• Full Load Amps
• Insulation Class
• Horsepower
• Number of Phases
• Motor Code
• Connection Diagram
• Start Torque
• Enclosure Type
• Volts
• Locked Rotor Amps
• Duty Rating
• Service Factor
• Frequency
• Ambient Temperature
2
Product Capabilities and Features
Limitorque L120-85 Installation, Operation and Maintenance FCD LMENIM1202-00 – 11/05
flowserve.com