Flowserve L120-85 Actuator - Manual (Page 47)

Application of Council Directive(s):
89/336/EEC; EMC Directive
89/392/EEC; Machinery Directive
2003/10/EEC; Airborne Noise Directive
Standard(s) to which Conformity is Declared:
Machinery; EN 60204
EMC - Emissions; EN 50081-1&2, EN 55011, CFR 47
Immunity; EN 50082-1&2, IEC 801-3 & IEC 801-6
ESD; IEC 801-2
EFT/Bursts; IEC 801-4
Surge Immunity; IEC 801-5, ANSI/IEEE C62.41
Mains (power) Harmonics; MIL-STD-462, Method
CSO1 & CSO2
Airborne Noise; MIL-STD-740-1, Table 1
Manufacturer’s Name:
Limitorque Corporation
Manufacturer’s Address:
5114 Woodall Road
Lynchburg, VA 24502
Importer’s Name:
Limitorque International
Importer’s Address:
Trinity House
Kennet Side
Newbury
Berkshire, RG15 5EH
England
Type & Description of Equipment:
Valve Actuators
Model Number:
L120 Series
Note:Tested with Limitorque products only
I, the undersigned, hereby declare that the equipment specified
above conforms to the above Directive(s) and Standard(s). List as
follows:
(Signature)
Andy Hole
(Full Name)
General Manager, Flowserve Limitorque EMA
(Title)
Newbury, England
(Place)
December 9, 2005
(Date)
11
Regulatory Information
a WARNING: Read this Instruction and Maintenance Manual carefully and completely before attempting to store, install, operate or
troubleshoot your Limitorque actuator. Be aware of electrical hazards within the actuator and high-pressure hazards of the attached
valve or other actuated device when installing or performing maintenance on your L120-85 actuator.

Limitorque L120-85 Installation, Operation and Maintenance FCD LMENIM1202-00 – 11/05
flowserve.com