Disposal, Declaration of conformity, Disposal declaration of conformity – Flowserve NRS1-40.1 User Manual
Page 33: Annex
33
– continued –
Disposal
Dismantle the control unit and separate the waste materials, using the specifications in the table "Materi-
als" as a reference. Electronic component parts such as the circuit board must be disposed of separately!
For the disposal of the control unit observe the pertinent legal regulations concerning waste disposal.
Declaration of Conformity
We hereby declare that the control unit NRS 1-40.1 conforms to the following European guidelines:
■
LV guideline 73/23/eec version 93/68/eec
■
EMC guideline 89/336/eec version 93/68/eec
■
Pressure Equipment Directive (PED) 97/23/EC of 29 May 1997
Applied conformity assessment procedure: Annex III, Module B and D, verified by the
Notified Body 0525.
This declaration is no longer valid if modifications are made to the equipment without consultation with us.
Bremen, 7
th
April 2005
GESTRA AG
Dipl.-Ing. Uwe Bledschun
Leiter Konstruktion / Head of Design Dept.
Dipl.-Ing. Lars Bohl
Qualitätsbeauftragter / Quality Assurance Representative
i. V.
i. V.