Fluke Biomedical ESA609 - Manual (Page 19)

Electrical Safety Analyzer
Instrument Familiarization
7
Table 3. Side-Panel Connections
Item Name Description
 Calibration Port
Port for calibrating the instrument. (Located under the holster.) For use by
authorized service center only.
 Power Input Connector
A grounded male three-prong (IEC 60320 C19 or C13) connector that accepts
the line-power cord.
 Handstrap Location The slots used to attach the handstrap to the analyzer, see Figure 3.
 Equipment Outlet
Equipment outlet, specific to the version of the Analyzer, which provides a DUT
connection.