Fluke Biomedical ESA609 - Manual (Page 21)

Electrical Safety Analyzer
Connect the DUT to the Analyzer
9
Connect the DUT to the Analyzer
A Device Under Test (DUT) can be connected in a number
of different ways depending on the device and the number
of connections needed for a full electrical safety test.
Figure 4 shows a DUT connected to the test receptacle
and a separate connection to the DUT’s enclosure or
protective earth ground.
Warning
To prevent possible electrical shock, fire, or
personal injury, follow these guidelines:
• Do not touch exposed metal on banana
plugs, they can have voltages that could
cause death.
• Remove circuit power before you connect
the Product in the circuit when you
measure current. Connect the Product in
series with the circuit.
• Connect an approved three-conductor
mains power cord to a grounded power
outlet.
• Do not put the Product where access to the
mains power cord is blocked.
• Do not put metal objects into connectors.