Fluke Biomedical ESA620 - Manual (Page 15)

1
Electrical Safety Analyzer
Introduction
The Fluke Biomedical ESA620 Electrical Safety Analyzer
(hereafter the Analyzer) is a full-featured, compact,
portable analyzer, designed to verify the electrical safety
of medical devices. The Analyzer tests to international
(IEC 60601-1, EN62353, AN/NZS 3551, IEC61010, VDE
751) and domestic (ANSI/AAMI ES1, NFPA 99) electrical-
safety standards. The integrated ANSI/AAMI ES1,
IEC60601-1, and IEC61010 patient loads are easily
selectable.
The Analyzer performs the following tests:
•
Mains (Line) voltage
•
Protective Earth (or Ground Wire) Resistance
•
Equipment current
•
Insulation resistance
•
Earth (Ground) leakage
•
Enclosure (Chassis) leakage
•
Patient (Lead to Ground) and patient auxiliary
(Lead to Lead) leakage
•
Mains on applied parts leakage (Lead isolation)
•
Differential leakage
•
Direct equipment leakage
•
Direct applied part leakage
•
Alternative equipment leakage
•
Alternative applied part patient leakage
•
Accessible part leakage
•
Accessible part voltage
•
Point to point leakage, voltage, and resistance
•
ECG simulation and performance waveforms