Fluke Biomedical ProSim 2 - Manual (Page 21)

Vital Signs Simulator
Operation
9
hal002.eps
Figure 5. Home Screen
Operation
All Product functions are shown in the home screen. See
Figure 5. To set parameters for a function, push the
navigation buttons (, , , ) to move the highlight to a
function icon. Push . Table 6 is a list of Product
functions shown in the home screen.
Table 6. Product Functions
ICON Description ICON Description
ECG ECG Waveform PACE Pacemaker
RESP Respiration TEMP Temperature
BP Blood Pressure CO Cardiac Output
ARRY Arrhythmia FE/MA Fetal/Maternal
PERF Performance Wave SETUP Setup
To set a parameter of a function:
1. Push the navigation buttons to move the highlight to a
function. Figure 6 shows the cardiac output icon
highlighted.
hal005.bmp
Figure 6. Home Screen – Cardiac Function