Fluke Biomedical ProSim 2 - Manual (Page 40)

ProSim™ 2/3
Users Manual
28
General Commands
Table 9 is list of the modes and their description.
Table 9. Product Control States and Modes
Mode Type Description
LOCAL Local Local control
RMAIN Main Main remote control
DIAG Sub Diagnostic tests remote sub-mode
CAL Sub Calibration remote sub-mode
Table 10 is a list of general commands that set the control
states and modes of the Product. The table shows in
which mode the command is recognized and the response
the Product will send to the PC when the command is
completed.
Table 10. General Commands
Command
Legal
Mode
Returns Description
REMOTE LOCAL RMAIN Go to remote control
LOCAL RMAIN LOCAL Go to local control
QMODE All
modes
See
Table 10 Query the mode
Function Commands
The function commands are grouped by the function they
support.
ECG Functions
Tables 11 and 12 are lists of commands that control the
ECG functions of the Product. These are Normal-sinus
ECG, ECG amplitude, adult/pediatric, ST elevation, ECG
artifact simulation, pacemaker waveform, pacemaker
amplitude, and pacemaker width.
Table 11. ECG Function Commands
Action Command
Normal Sinus
30 bpm NSR30
40 bpm NSR40
45 bpm NSR45
60 bpm NSR60
80 bpm NSR80
90 bpm NSR90
100 bpm NSR100